Tamiya sales and customer service outside of Japan are overseen by a network of local agents.Find your nearest agent

Item No:47484

Special Edition R/C Models No.184

1/10 R/C 1990 MERCEDES-BENZ C 11

Length: 490 mm. Image shows painted and assembled kit.

With seven wins in just eight appearances during the 1990 World Sports Prototype Championship (WSPC), the Mercedes-Benz C 11 was clearly the class of the field - Boasting a carbon fiber monocoque chassis and powerful 5-liter V8 twin turbo engine, it had an unrivalled pairing of speed and reliability. This assembly kit recreates that car in 1/10 scale, with the honed body depicted in polycarbonate, plus stickers included to recreate one of two cars.

Direct-Drive 2WD Chassis
Based around an ABS plastic bathtub, with space frames front and rear and FRP plates, the chassis is a composite design that offers a rigid base to back up the fluid suspension: the result is a crisp, responsive drive. At the front, it has an independent coil-sprung king pin suspension setup, while the rear rigid suspension is a 3-point design with a 1.5mm thickness FRP T-bar and CVA oil damper; teamed up with sponge tires front and rear, they ensure superb road holding. Additionally, use of spacers allows two different front and three rear ground clearance setups.

★Length: 490mm, width: 206mm, height: 110mm ★Wheelbase: 280mm ★Tread: 172m (front), 152mm (rear) ★Tire width/diameter: 28/64mm (front), 45/68mm (rear) ★Bathtub frame with space frame and FRP plates ★Transverse motor direct drive 2WD ★Ball differential ★2-piece steering tie-rod ★3-point suspension with CVA oil damper ★Gear ratio = 5.00:1 ★Sport-Tuned motor ★Electronic speed controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
  • Take a look at the aerodynamically honed body from the rear, recreated accurately in polycarbonate.
  • Separate headlight cases add extra realism; paint and stickers are used for an authentic finish.
  • The sizable wing is rendered in polycarbonate, with plastic stays holding it in place.
  • This image shows the direct 2-piece steering tie-rod setup, and the sturdy front space frame.
  • A closer look at the front suspension, which uses a king pin and coil spring setup.
  • A 1.5mm thickness FRP T-bar and CVA oil damper are at the center of the rear suspension.
  • The model is powered by a Sport-Tuned motor, and uses a direct drive setup with the spur next to the ball differential.
  • Sponge tires afford the car excellent grip. Goodyear sidewall logo stickers are provided.

Information is current as of May 6, 2022. Specifications are subject to change without notice.