Tamiya sales and customer service outside of Japan are overseen by a network of local agents.Find your nearest agent

Item No:58738

All Electric R/C Car Series No.738


*Body, motor, R/C equipment, battery pack and charger are sold separately.

This compact shaft-driven 4WD chassis assembly kit features a front midship motor and transmits power from the spur gear in the center via front and rear propeller shafts. A longitudinal upright battery pack is positioned in the left side, contributing to optimum balance. Changing the rear section allows a choice from three wheelbases. The 4-wheel independent double wishbone suspension has aluminum-cylinder oil dampers. Front caster angle is 5 degrees, and hub carriers and uprights allow two types of ground clearance, while the front bumper skid angle reduces surface contact.

Featured Components
Drivetrain: ★Front & rear oil-filled gear differentials (two 39T and one 40T included) Front & rear universal drive shafts Full ball bearings
Suspension: ★Aluminum oil dampers (blue caps) ★5-degree caster suspension mounts ★Turnbuckle upper arms
Chassis: ★Polycarbonate chassis cover ★Front bumper with skid angle ★Hi-torque servo saver

★Length: 308mm (with 225mm wheelbase) Width: 165mm Choice of 210mm, 225mm and 239mm wheelbases Bathtub frame Front midship motor, shaft-driven 4WD Front/rear oil filled gear differentials 3-piece steering tie-rod 4-wheel independent double wishbone suspension Aluminum cylinder oil dampers Gear ratio = 8.27:1 (with kit 22T pinion; 13 ratios between 10.71 and 6.28:1 are possible with separately sold pinions) Contact your local Tamiya Agent regarding the ESC

Separately Required Items
●Body ●Type 540 motor ●2-channel R/C system ●Battery pack & charger

  • Heavier equipment is placed in the middle of the chassis, and the battery has an upright position.
  • The steering setup uses a 3-piece tie-rod with adjustable turnbuckle shaft.
  • The front suspension has 5 degrees of caster thanks to its mount.
  • Skid angle applied to the front bumper helps minimize speed loss.
  • A closer look at the rear wishbone design suspension.
  • Blue anodized caps and aluminum cylinders are used in the oil dampers.
  • New front hub carriers and rear uprights let you choose ground clearance.
  • Change the rear construction to switch between the three wheelbases.
  • The three wheelbases.
  • High performance oil-filled differential gears are employed front and rear.
  • S and M/L wheelbase propeller shafts are included.
  • 11-spoke wheels are paired with rally block tires.
  • The polycarbonate chassis cover also features wheel well covers.

Parts search

Information is current as of April 9, 2024. Specifications are subject to change without notice.